
Carrara marble
StoneSoft grey veining on a white ground. Honed for a matt, tactile surface.
- Oak
- Brass
- Warm plaster
Bu sayfa şimdilik İngilizce. Türkçesi hazırlanıyor.
Malzemeler
Her projeye malzemeyle başlarız. Taş, ahşap, metal ve cam bir odanın hissini yerleşimden çok önce belirler.

Soft grey veining on a white ground. Honed for a matt, tactile surface.

Deep brown and black stone with a bold white vein. Dramatic on a splashback or a basin.

Warm, fossil-textured limestone. Filled and honed for worktops and islands, so the surface is smooth under the hand.

Open-grained and oiled, kind to fingerprints. Pale for lightness, smoked for depth.

Fluted glass for display cabinets. Softens what is behind and catches the light.

Warm veining in copper and grey on a pale ground. Used sparingly, as a feature.
Malzeme rehberi
Her biri nasıldır, nerede en iyi çalışır ve nasıl bakılır. Genel rehberlik: kendi yüzeyiniz için üreticinin talimatları her zaman önce gelir.

01 · Timber

02 · Timber

03 · Stone

04 · Stone

05 · Painted finish

06 · Glass

07 · Metal
Bakım rehberi
Birkaç alışkanlık her üründen fazlasını yapar. Dökülenleri erken silin, ıslak olanı kurulayın, kesme tahtası ve sıcak altlığı kullanın, karar vermeden önce numuneleri evde deneyin. Taş ve meşe için daha ayrıntısı bakım yazısında.
| Malzeme | Her gün | Kaçının | Ara sıra |
|---|---|---|---|
| Oak | Soft, slightly damp cloth, then dry | Standing water, steam from the dishwasher, hot pans on oiled timber | Refresh the oil on worktops, sand light scratches with the grain |
| Walnut | Dust, then a soft damp cloth | Long direct sun, standing water | Light oiling if the finish is oiled |
| Limestone | Soft cloth, pH-neutral soap, rinse and dry | Acids, bleach, limescale removers, abrasive pads | Test for sealer with a few drops of water, reseal when it darkens the stone |
| Marble | Soft cloth, pH-neutral soap, rinse and dry | Lemon, vinegar, wine left on the surface, harsh cleaners | Reseal, and have a specialist hone out etching if it bothers you |
| Lacquer | Soft cloth, warm water, mild soap | Solvents, abrasive pads, standing water at the edges | Touch up or re-spray a damaged panel |
| Glass | Water with a drop of soap, lint-free cloth | Abrasive pads, leaving hard water to dry on the surface | Brush the ribs of fluted glass to lift dust |
| Metal | Soft cloth, mild soap, dry | Abrasives on brushed finishes, acidic cleaners | Polish brass if you want it bright, or leave the patina |
Her malzemeyi yaşayacağı yerde değerlendirebilmeniz için fiziksel numuneleri evinize getiririz.